Avaya G700 Installation Manual page 14

Job Aid: Firmware Download Procedures for the G700 Media Gateway
Note:
If you are using a TFTP server other than an S8300 Media Server, you must
Note:
enter the full path name for <image-file> and <ew_file>; for example, c:\
tftpboot\viisa4_0_17.exe, and c:\tftpboot\p330Tweb.4.0.4.exe.
<tftp_server_ip_address> is the IP address (on the customer's LAN) of the TFTP
server that contains the firmware image files.
<Module#> is the number, 1 through 10, of the media gateway in the stack. If there is only
one G700 Media Gateway, the number is 1.
For example,
copy tftp
tftpboot\p330Tweb.4.0.4.exe
Note:
If there are additional G700s or other Cajun devices in the stack, install the new
Note:
firmware in each of the P330 stack processors before executing the reset
command. (See
and <ew-file> are used for the following Cajun devices: G700, P333T,
P333T-PWR, P332MF. Other devices, such as the C360, use different image
files.
3. At the P330-1(super)# prompt, type reset <module #> for a single device, or reset
stack for multiple devices in the stack.
Note:
The reset command will interrupt service. Your telnet connection will be lost so
Note:
you will need to reconnect to the P330 stack processor.
4. When the reset is complete, telnet to the P330 stack processor and verify that the download
was successful.
a. At the P330-1(super)# prompt, type show image version <module #>
Check the version number in the Version column for Bank B of the "Avaya G700 Media
Gateway" Module-Type.
Mod
---
1
1
14 Firmware Download Procedures for the G700 Media Gateway
SW_image c:\tftpboot\viisa4_0_17.exe
Stack Configurations
Module-Type
-----------
Avaya G700 Media Gateway
Avaya G700 Media Gateway
195.123.49.54 2
on page 18). The same <image-file>
Bank Version
---- -------
A 0.0.0
B 4.0.17
EW_Archive c:\