Table of Contents
Advertisement
Installation
6.
7.
4 4 .3.3
Do a final check on the appliance
Safety conditions
Procedure
1.
2.
3.
30
Put the logs on the burner bed. Refer to
Install the glass. Refer to
Caution:
A final check on the appliance can be done directly after the installation.
Start the appliance and do a check on the ignition of the pilot light and main burner.
The ignition must be quiet and must produce a calm flame. To start the appliance,
refer to the user manual.
Do a check on the main burner. The flames increase in height and change from blue/
yellow to yellow.
If all flames are yellow, the appliance is ready for use.
2.6
for the numbers of the items.
5.2.2
.
Box Gas Panorama 45/45
Advertisement
Table of Contents
