Do A Final Check On The Fireplace - Bellfires Smart Bell 65 MF Installation And Maintenance Manual

Installation
6.
7.
4 4 .3.3

Do a final check on the fireplace

Safety conditions
Procedure
1.
2.
3.
24
Put the logs and chips of wood on the burner bed. Refer to
items.
Install the door (including glass.) Refer to
Caution:
Wait 4 weeks after the installation before you use the fireplace. The cement
needs to harden. A final check on the fireplace can be done directly after the
installation.
Start the appliance and do a check on the ignition of the pilot light and main burner.
The ignition must be quiet and must produce a calm flame. To start the appliance,
refer to the user manual.
Do a check on the main burner. The flames increase in height and change from blue/
yellow to yellow.
If all flames are yellow, the appliance is ready for use.
2.6
for the numbers of the
5.2.2
.
Smart Bell 65-55