Table of Contents
Advertisement
5 5
Maintenance
5.1
Annual maintenance
•
5.1.1
Clean the appliance
Safety conditions
Procedure
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Clean the glass. Refer to
11. If the black mirror rear wall is installed in the appliance, clean the black mirror. Use
12. Prepare the appliance for use. Refer to
5.1.2
Do a check on the appliance
1.
2.
Box Gas Panorama 45/45
Do all procedures in this section every year.
Caution:
•
Use only original parts. Individual parts for replacement or accessories
are available from your BELLFIRES-dealer.
•
Introduced modifications to the appliance are not permitted.
Caution:
•
Turn off the gas supply to the appliance before cleaning.
•
Turn off the power supply to the appliance before cleaning.
Remove the glass. Refer to
Remove the content from the burner bed.
Clean the removed content carefully with a soft brush.
Clean the inside of the appliance, including the main burner, the pilot light burner and
the flue system.
Remove the grate.
Clean the combustion air intake
a)
Clean the combustion air intake
(A) at the bottom sides of the
appliance.
b)
Clean the primary combustion
air inlet openings (B) of the main
burner (front and rear).
Clean the ambient light bulbs. Refer
5.2.4
to
.
Clean the convection air route.
Do a check for damage on the inside of the appliance, including these parts:
a)
Main burner.
b)
Pilot burner.
c)
Combustion air intake.
d)
Flue system. Use a flashlight if necessary.
glass spray or ceramic hob cleaner.
Do a check for leaks on the gas pipes and the gas pipe connections. Refer to
Make sure that the pilot light operates correctly. The pilot light must not show any
anomalies.
5.2.1
.
5.2.3
.
4.3
.
Maintenance
4.2.6
.
31
Advertisement
Table of Contents
