Installation
1.
2.
3.
4.
5.
4 4 .2.5
Make the gas connection
1.
2.
22
Mark the locations on the wall for the 4 corner screws by which the support frame is
attached to the wall. Make sure the support frame is horizontal when marking the
locations. Use a spirit lever.
Drill the 4 holes.
Attach the support frame to the wall with appropriate screws. Use plugs when
necessary.
Attach the cover to the support frame. Use an hexagonal key of size 5.
Put the appliance on the support frame. Make sure that all four hooks of the support
frame go into the slots on the back of the appliance. Lower the appliance until it
hangs tightly on the support frame.
Caution:
•
Do not twist the gas supply pipe to the gas regulator block. Make sure that
there is no stress on the gas supply pipe and the gas regulator block.
•
Make sure that you do not damage the gas supply pipe.
Connect the gas to the appliance. Use a compression fitting.
Make sure that the gas is correctly connected.
Box Gas Panorama 45/45