Advertisement
3
USING THE APPLIANCE FOR THE FIRST TIME
The gas fi re is coated with a lacquer layer resistant to high temperature.
During the fi rst hours of operation, the burning in of the lacquer may result in an
unpleasant smell. This is harmless, however.
Operating the gas fi re at full capacity for a few hours, while ventilating the room, will
eliminate the smell.
After using your gas fi re for the fi rst few times, you may be aware of a light deposit on
the inside off the glass. This is caused by the paint curing.
This deposits can be removed by following of the Maintenance instructions anti-
refl ective glass.
See Chapter 4: Daily Maintenance.
NOTE:
To prevent damage to the coating layers on the glass, the use of hard
(scouring) sponges, steel wool, abrasives and cleaning agents containing
ammonia is forbidden. The use of caustic products and products containing
abrasives, such as ceramic hob cleaners, is also forbidden.
Instructions for use
English
31
Advertisement
