Table of Contents
Advertisement
Installation
4 4
Installation
4.1
Installation prerequisites
1.
2.
4.2
Installation procedure
•
4.2.1
Install the appliance
1.
2.
3.
4.
20
Make sure that the location agrees with the requirements. Refer to the preparation
manual.
Make sure that the details of the rating plate of the appliance agree with the gas type
and gas pressure of the gas supply.
Note:
The appliance is factory set to the correct nominal heat input. The pilot light is
set to the correct level of gas consumption.
Do all the procedures in this section. Optional procedures are indicated with
(optional).
Install the appliance. Make sure that the distance C is alright. Refer to
Place a nonflammable hearth (floor stone) under the appliance when necessary.
3.3
Refer to
.
Situate the appliance in such a way that the concentric flue outlet connection is
precisely in line with the concentric flue pipe to the ceiling or wall.
Put a nonflammable insulation plate between the appliance and the rear wall when
3.3
necessary. Refer to
.
3.3
.
Box Gas Panorama 45/45
Advertisement
Table of Contents
