5. CPX pneumatic interfaces
5.2
Assembly
Festo P.BE-CPX-EA-EN en 1105h
Warning
Uncontrolled movements of the connected actuators and
uncontrolled movements of loose tubing can cause injury
to human beings or damage to property.
Before carrying out installation and maintenance work,
switch off the following:
– Compressed air supply
– The operating and load voltage supplies.
Expanding or converting the CPX terminal:
Depending on the version of the CPX terminal, pneumatic
interfaces are either screwed in place or secured with tie
rods. Further information can be found under the "Assembly"
chapter in the CPX system manual.
For information regarding assembly of the pneumatic
modules please refer to the appropriate pneumatics manual.
For Midi/Maxi, CPA or ISO pneumatic interfaces:
The setting of the DIL switches for configuring the pneumatics
(valves used) can be set on the CPX terminal without the need
to dismantle the terminal.
5-9