Setting The Date And Time; Recording In Driving Mode; Continuous Recording; Event Recording - Mio MiVue J60 Series User Manual

Setting the date and time

To make sure that the date and time of your recordings are correct, use the MiVue
Pro app to check the settings before you begin recording.
1. Turn the dash cam on.
2. Open the MiVue Pro app and complete the WIFI connection.
> Settings > Date / Time.
3. Tap
4. Select Manual or GPS.
When you select Manual, the system will update its date and time settings by
l
synchronising them with the connected smartphone.
When you select GPS, you need to set the Time Zone and Daylight Saving
l
Time options according to your location. When done, the system will set date
and time automatically.

Recording in driving mode

Continuous recording

By default, the system will automatically begin continuous recording in few seconds
after start-up.
The recording may be divided into several video clips; recording will not stop
between video clips.

Event recording

By default, if an event happens such as a sudden impact, high speed driving, an
aggressive turn or an accidental crash during continuous recording, the G sensor will
prompt the dash cam to start recording the event.
Note: You can change the sensitivity level of the G sensor via the MiVue Pro app.
11