Driving Safety - Mio MiVue J60 Series User Manual

WDR: Enables the Wide Dynamic Range (WDR) function to improve the dash
l
cam's image quality under high-contrast lighting conditions.
EV: Sets the exposure level (-1 – +1) to adjust the brightness of the image.
l
G-Sensor: Sets the sensitivity level of the G sensor that allows automatic
l
triggering of event recording while continuous recording is in progress.
Stamps: Sets the information (COORDINATE or GSENSOR) that will be
l
displayed on the recorded video.
Speed stamp: Displays the driving speed on the recorded video.
l

Driving Safety

The dash cam provides advanced driving safety functions to make your driving
safer.
Calibration: You are advised to calibrate the system
l
constantly in order to be alerted properly. Follow the
steps to calibrate the system.
1. Drive the vehicle in the middle of the lane.
2. Ask a passenger to select this option and then
follow the on-screen instructions to complete
calibration.
LDWS: The system will alert you when the detected car speed is over 60 km/h
l
and the car has strayed from its intended lane.
FCWS: The system will alert you when the car moves slowly and gets too close
l
to the car ahead.
Headlight Reminder: The system will remind you to turn the lights on when you
l
are driving after dark.
Fatigue Alert: The system will remind you to take a break for a long-distance
l
drive (2 hours, 3 hours or 4 hours).
14