Setting The Date And Time; Setting Up A Wifi Connection - Mio N548 User Manual

Setting the date and time

To make sure that the date and time of your recordings are correct, check the
settings before you begin recording.
1. Press to access the Settings Menu.
2. Select System > Date/Time.
3. Select Use GPS time or Manual:
When you select Use GPS time, press
l
of your location. The system will set date and time according to the GPS
location.
When you select Manual, the system will display the date and time setting
l
screen. Use
and repeat the step until all fields have been changed.
4. When done, press

Setting up a WIFI connection

The WIFI function allows you to connect the dash cam to your smartphone. The
WIFI function is disabled by default. You can manually enable WIFI by selecting
> WIFI > On. Once enabled, the WIFI setting screen displays the SSID and
password of the dash cam.
Follow the steps below to build the wireless connection between the dash cam and
your smartphone:
1. Enable the wireless function of the smartphone.
2. The smartphone will automatically scan for available wireless devices. Tap the
wireless setting to display the detected devices.
3. From the list, select the dash cam's SSID (MiVue-xxxx) and enter the password
(xxxxxxxxxx). When done, tap Connect.
/ to adjust the value of the selected field; press
.
13
/ to select the time zone