Stop and GO: The system will alert you when the car ahead has proceeded to go
l
after being stopped for longer than 10 seconds.
Parking Mode
Detection: When enabled, the dash cam will automatically enters the Parking
l
mode when the car stops moving for about 5 minutes.
Security LED Indicator: Turns on or off the Parking indicator in the Parking
l
mode.
Detection Method: Sets the detection method (GSENSOR, MOTION or BOTH)
l
to start parking recording when the system detects movements or if an event
happens in the Parking mode.
G-Sensor Sensitivity: Sets the sensitivity level of the G sensor that allows
l
automatic triggering of the parking recording when the dash cam is in the Parking
mode.
Motion Detection: Sets the sensitivity level of motion detection to Low, Medium
l
or High.
SafetyCam
Alert Sound: Turns on (Beep or Voice) or off (Mute) the alert sound.
l
Alert Distance: The system will alert you at a preset distance when a safety
l
camera is detected.
Alert Method: Sets the alert distance function according to the current GPS car
l
speed (Smart Alert) or the speed limit (Standard Alert).
System
Date / Time: Sets the system date and time.
l
Welcome Sound: Enables or disables the notification sounds during start-up.
l
Volume: Adjusts the volume level.
l
15