Operating Basics; Turning The Recorder On; Setting The Date And Time - Mio MiVue C320 Series User Manual

Operating basics

Turning the recorder on

Complete the installation according to the instructions in the "Using your recorder in a
vehicle" section. Once the vehicle engine is started, the recorder automatically turns on.

Setting the date and time

To make sure that the date and time of your recordings are correct, check the settings before
you begin recording.
1. Press to access the Settings Menu.
2. Select System > Date / Time and press
3. Select Use GPS time* or Manual:
ƒ When you select Use GPS time, the system will set date and time according to the
GPS location.
ƒ When you select Manual, the system will display the date and time setting screen.
Use /
until all fields have been changed. When completed, press
* For selected models only.
to adjust the value of the selected field; press
.
8
and repeat the step
.
en