Setting your recorder
Setting the date and time
To ensure the accuracy of recorded date and time, make sure to set the date
and time before recording.
1.
Make sure the MicroSD card is inserted.
2.
Remove the protective cap.
3.
Turn on your computer and the recorder.
4.
Connect the recorder to your computer. (See the "Connecting to a
computer" section for detailed information.)
5.
The recorder will be recognised as an external storage device. Open
the "Time.txt" file from the root directory of the MicroSD card.
6.
Enter the correct date and time by following the sequences below.
Date: YYYY/MM/DD (for example, "2013/04/19")
Time: hh:mm:ss (for example, "10:30:54")
7.
Change the setting value of [UPDATE:] from [N] to [Y] to save the
changes. Otherwise, your changes will not be saved.
8.
Close the "Time.txt" file.
12
English