Setting The Date And Time; Recording In Driving Mode; Continuous Recording - Mio MiVue 798 User Manual

Setting the date and time

To make sure that the date and time of your recordings are correct, check the
settings before you begin recording.
1. Press > System > Date/Time.
2. Do one of the following:
Select Use GPS time, and then select the time zone of your location. The
l
system will set date and time according to the GPS location.
Select Manual, and the system will display the date and time setting screen.
l
Use /
the step until all fields have been changed. When done, press

Recording in driving mode

Continuous recording

The system will automatically begin continuous recording in few seconds after start-
up. The System indicator flashes in green and amber alternately while the recording
is in progress.
When continuous recording is in progress, you can manually stop recording by
pressing . Press
continuous recording automatically.
The recording may be divided into several video clips; recording will not stop
between video clips. When your memory card fills up with continuous recordings, it
will automatically record over the oldest existing files in this category.
The continuous recordings can be found in the "Normal" category for file playback.
to adjust the value of the selected field; press
to return to the recording screen; the system will start
11
and repeat
.