Formatting A Card; Turning The Dash Cam On; Shutting Down The Dash Cam - Mio MiVue J60 Series User Manual

Formatting a card

Use the MiVue Pro app to format a memory card (
Card).
Note:
DO NOT apply pressure to the centre of the memory card.
l
MiTAC does not guarantee the product's compatibility with memory cards from all manufacturers.
l
Before you start recording, please format the memory card to avoid malfunction caused by files not
l
created by the dash cam.
Turn the device off before removing the memory card.
l

Turning the dash cam on

Complete the installation according to the instructions in the "Using your dash cam
in a vehicle" section. Once the vehicle engine is started, the dash cam automatically
turns on.

Shutting down the dash cam

Occasionally, you may need to perform a hardware reset when the dash cam stops
responding or if it appears to be "frozen" or unresponsive.
To shut down the dash cam, press and hold the Power
button until the system is shut down.
If the system does not shut down by keeping the Power
button pressed, you can force it to shut down by inserting
a small rod (such as a straightened paper clip) into the
Shutdown button of the device.
> Settings > Format SD
10