Mounting The Dash Cam - Mio MiVue J60 Series User Manual

If the car's windscreen is tinted with a reflective coating, it may be athermic and
l
impact the GPS reception. In this instance, please mount your device where there
is a "clear area."
The system will automatically calibrate the G sensor of the device during start-up.
l
To avoid G sensor malfunction, always turn the device on AFTER you mount it in
the vehicle properly.

Mounting the dash cam

1. Make sure that your car is parked on level ground.
Note:
Before sticking the mounting pad, clean the windscreen with rubbing alcohol.
l
If the adhesion of the adhesive tape does not perform well, replace the tape with a new one.
l
2. Connect the car charger to the cigarette
lighter. Route the cable through the top
ceiling and the A-pillar so that it does
not interfere with driving. Make sure that
the cable installation does not interfere
with the vehicle's airbags or other safety
features.
1 2
8