Switching screens
Once you connect the rear camera and start recording, the
the screen. You can switch the front and rear camera images by pressing
Setting the date and time
To make sure that the date and time of your recordings are correct, check the
settings before you begin recording.
1. Press
to access the Settings Menu.
2. Select System > Date/Time.
3. Do one of the following:
Select Use GPS time, and then select the time zone of your location. The
l
system will set date and time according to the GPS location.
Note: This feature is not available on all models.
Select Manual, and the system will display the date and time setting screen.
l
Use
/
step until all fields have been changed.
4. When done, press
to adjust the value of the selected field; press
.
11
icon will appear on
.
and repeat the