Switching screens
Once you connect the rear camera and start recording, the screen displays the
PIP (picture-in-picture) mode. You can switch the front and rear camera images by
pressing
.
Setting the date and time
To make sure that the date and time of your recordings are correct, check the
settings before you begin recording.
1. Press
to access the Settings Menu.
2. Select System > Date/Time.
3. Select Use GPS time or Manual:
When you select Use GPS time, press
l
of your location. The system will set date and time according to the GPS
location.
Note: This feature is not available on all models.
When you select Manual, the system will display the date and time setting
l
screen. Use
and repeat the step until all fields have been changed.
4. When done, press
/
to adjust the value of the selected field; press
.
11
/
to select the time zone