Table of Contents
Advertisement
This interface is serial and enables the local connection of an external
management station (VT100 terminal or PC with corresponding terminal
emulation). This enables you to set up a connection to the Command Line
Interface CLI and to the System Monitor.
VT 100 terminal settings
Speed
Data
Stopbit
Handshake
Parity
The socket housing is electrically connected to the housing of the device.
The V.24 interface is not electrically isolated from the supply voltage.
You can use the V.24 interface to connect the AutoConfiguration Adapter
ACA11 storage medium.
The AutoConfiguration Adapter ACA21-M12 storage medium is incompatible
with BAT450-F.
Figure
Pin
1
2
3
4
Table 2:
Pin assignment of the V.24 interface (M12 socket)
20
9600 Baud
8 bit
1 bit
off
none
Function
TX
Transmit Data
RX
Receive Data
N.C.
Not used
GND
Ground
Installation BAT450-F
Release 03 08/2016
Advertisement
Table of Contents
