2.2
Installing and grounding the device
2.2.1
Installing the device onto or on a flat surface
You have the option of attaching the device with suitable hardware to a
vertical flat surface.
The diameter of the mounting hardware is maximum 0.20 in. (5 mm).
The head diameter is maximum 0.47 in. (12 mm).
The diameter of a flat washer used is maximum 0.48 in. (12 mm).
Proceed as follows:
Prepare the assembly at the installation site.
See "Dimension drawings" on page 34.
Install the device with suitable fastening components.
Seal all unused connections and ports with protection screws.
Installation BAT450-F
Release 03 08/2016
23