4.5
4.5.1
Introduction
The following chapters describe the typical usage of the JVL Motor and which registers
to use in the different applications.
The chapter should be considered as a general guideline to get started with the
EthernetIP integration of the JVL Motor.
!
JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors
Implementation guidelines
IMPORTANT!: Please notice that the motor will be active and may start
moving when the mode register (reg. 2) is set to anything than 0 (passive
mode). The MAC400, 800, 1500 and 4500 will require AC supply in order
to be active.
99