Commissioning - JVL MAC00-EC41 User Manual

7.2
7.2.1 Indicator LED's - description.
The LED's are used for indicating states and faults of module. There is one power LED,
two link/activity LED's (one for each Ethernet connector) and 2 status LED's.
MAC Module Indicators
and label overview
General status
indicator
Line activity
indicators
TT3059-02GB
LED indicator descriptions - Covers both MAC and MIS/MIL.
LED Text
MAC / MIx
L/A IN /
L2
L/A OUT /
L3
RUN /
L1
ERROR /
ERR
PWR
Notes:
Flickering: Rapid flashing with a period of approx. 50ms(10Hz).
162 JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors

Commissioning

Error indicator
Power
indicator
MAC address
Hardware serial number
Off Red
No valid Ethernet -
connection
No valid Ethernet -
connection
Initializing
-
or no valid
Ethernet
No Errors Fatal error
Power is not
-
applied
MIS Motor Indicators
and label overview
Hardware serial number
Orange Green
- Ethernet is
connected
- Ethernet is
connected
TCP server TCP client
open for connected
connections
- -
Power is
-
applied to
both motor
and module.
Power indicator
Error indicator
General status indicator
Line activity indicator (CN2)
Line activity indicator (CN3)
MAC address
(placed at front)
Flickering Very slow
Green blinking green
-
-
- Wrong constel-
lation of IP, NM,
and GW
-
Power is
applied to
module but
no communi-
cation with
motor.