Using None Cyclic Messages - JVL MAC00-EC41 User Manual

4.2
None cyclic messages in the EtherNet/IP domain is called Explicit messages.
This message type is typically used to perform configuration and other none-time critical
operations.
Explicit messages can be send as a connected or unconnected message.
All registers in the motor and in the EthernetIP module can be accessed explicitly using
object classes 0x64 and 0x65 respectively. Please see the paragraphs
object class 0x64, page 85
4.2.1 Type definitions:
UINT
DINT
STR
4.2.2 Identity object class 0x01
Holds data on different module specific data.
Instance = 1
Attr. ID Access Name
1
2
3
4
5
6
7
See the EtherNet/IP spec. for further details section Vol2 sect.5-3.
Supported Services
0x1
0x10
0xE
JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors

Using none cyclic messages

and
16bit
32bit
String of ASCII-chars
R Vendor ID
R Device Type
R Product code
R Revision
R Status
R Serial number
R Product name
Get_Attribute_All
Set_Attribute_Single
Get_Attribute_Single
Vendor specific JVL object class 0x65, page 87
Data type Description
UINT JVL vendor ID = 936 (0x3A8)
UINT Value=10
UINT Value = 1
UINT Major = 1.byte, minor = 2. byte
UINT Status
DINT Serial number
STR "MAC00-EIx"
Vendor specific JVL
83