Commisioning - JVL MAC00-EC41 User Manual

8.2
8.2.1 Indicators LED description
The LED's are used for indicating states and faults of the Sercos
power LED, two link/activity LED's (one for each Ethernet connector), and 2 status
LED's.
MAC Module Indicators
and label overview
General status
indicator
Line activity
indicators
TT3010-02GB
LED indicator descriptions
LED Text
MAC / MIx
L/A IN /
L2
L/A OUT /
L3
STATUS /
L1
ERROR /
ERR
PWR /
PWR
Notes:
Flickering: Rapid flashing with a period of approx. 50ms (10 Hz).
180 JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors

Commisioning

Error indicator
Power
indicator
MAC address
Hardware serial number
Colour Constant off Constant
Green No valid Ethernet
connection.
Green No valid Ethernet
connection.
Multi color
Multi color Sub Device
not active
Green Power is not
applied.
MIS Motor Indicators
and label overview
Power indicator
Hardware serial number
Constant
Orange Green
- Ethernet is
connected.
- Ethernet is
connected.
- See table below -
Parameteri- Operating
zation level level
Power is -
applied to
both motor
and module.
® module. There is one
Error indicator
General status indicator
Line activity indicator (CN2)
Line activity indicator (CN3)
MAC address
(placed at front)
Constant Flickering
Red
- Activity
on line
- Activity
on line
Class 1 -
Diagnostics
error
- Power is ap-
plied to module
but no com-
munication with
motor.