How To Find Fw/Hw Version At Product - JVL MAC00-EC41 User Manual

1.3

How to find FW/HW version at product

1.3.1 Check Ethernet module version.
The firmware and hardware version of the Ethernet MAC module or the integrated
Ethernet module in the MIS/MIL motor can be checked from the MacTalk software when
connected to the motor. Select the tab for the Ethernet protocol in use, and check the
"Module info" frame. For some protocols and some motors is also the minimum capable
cycle time when using a drive profile (CiA402, FSP Drive etc.) listed.
1.3.2 Check motor version.
The hardware version of the motor can be found using MacTalk. Move the mouse curser
to the lower left corner and a pop-up box will show with all the relevant info.
The firmware version in the motor can be seen at the green text in the bottom of the
picture.
JVL Industri Elektronik A/S - User Manual - Ethernet expansion modules for MAC motors
TT3114-01GB
FW version
TT3113-01GB
HW version
13