Connector Description - JVL MAC00-EC41 User Manual

2.3
L/A IN
Primary Ethernet
channel
M12 ‐ 4pin female
Ethernet coded
(D coded)
L/A OUT
Secondary Ethernet
channel
M12 ‐ 4pin female
Ethernet coded
(D coded)
Used when module
is daisy chained
2.3.1 Expansion module MAC00-Ex4 (basic version) connector description
The MAC00-Ex4 offers IP65 protection and M12 connectors which makes it ideal for au-
tomation applications where no additional protection is desired. The M12 connectors of-
fer solid mechanical protection and are easy to unplug.
The connector layout:
"PWR" - Power input. M12 - 5pin male connector
Signal name
P+
P+
P-
CVI
P-
* Note: P+ and P- are each available at 2 terminals. Make sure that both terminals are connected in order to
split the supply current in 2 terminals and thereby avoid an overload of the connector.
(Continued next page)
22 JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors

Connector description

Expansion module MAC00-Ex4 front plate
TT3002GB
Description
Main supply - Connect with pin 2 *
When installed in MAC050 to 141 = 12-48VDC
When installed in MAC400-4500 = 18-30VDC
Main supply - Connect with pin 1 *
Main supply ground. Connect with pin 5 *
Control supply nominal +12-48VDC.
DO NOT connect >50V to this terminal !
A small leakage current may exist on this pin if
not used.
Connect this terminal to ground if not used.
Main supply ground. Connect with pin 3 *
Only MAC
PWR
Power supply
M12 ‐ 5pin male
connector including:
P+ (primary supply), and CVI
(secondary supply) and
I/O
I/O's and RS232 interface
M12 ‐ 8pin female
connector including:
1 digital input and 1 digital
output, 1 analogue input
JVL Cable
WI1000-
Pin no. M12F5T05N
1 Brown
2 White
3 Blue
4 Black
5 Grey
P‐
Isolation
group
1
1
1
1
1