Setting Up The Ethernet At The Pc - JVL MAC00-EC41 User Manual

10.2

Setting up the Ethernet at the PC

10.2.1 Setting up the PC for EthernetIP, Profinet, ModbusTCP or Sercos.
When a connection is made directly from the PC it is very important to observe the IP-
settings of the PC, since the most common way is for the PC to receive the settings from
a server such as a DHCP/server or similar.
Since the motor doesn't offer any DHCP service it is necessary to setup the IP-address
in the PC manually.
Please note that this is taken from Windows 7, but the method is basically the same for
other Windows version.
To reach the IP settings please follow this path:
Step 1.
Press the LAN‐Connection and press the "Properties".
Continued next page
JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors
Follow this path to find the network settings
Find the «LAN-Connection»
LAN-connection
TT3071-01GB
243