Introduction To Modbus Tcp/Ip - JVL MAC00-EC41 User Manual

7.1 Introduction to Modbus TCP/IP®
MAC - Modbus TCP/IP Module
Type:
MAC00-
MAC00-
To be used in following servo products:
MAC50, 095, 140 and 141
MAC400 and MAC402
MAC800
MAC1500 and MAC3000
TT3058-02GB
7.1.1 Introduction.
Modbus
IP networks, connecting over port 502.
The JVL implementation also supports Modbus UDP, the same protocol as ModbusTCP
but transferred via UDP, which is faster, but with no connection control. It is basically a
Modbus RTU without a checksum calculation as lower layers already provide checksum
protection.
It is protocol based on the standard TCP/IP protocols so it is applicable anywhere there
is standard Ethernet available as it have no special requirements regarding the Ethernet
hardware, opposite some of the other industrial Ethernet protocols. Further information
about Modbus TCP is available from the Modbus Organization www.modbus.org.
160 JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors
4 (shown) or
EM
41 (extended I/O)
EM
TCP/IP or Modbus TCP — is a Modbus variant used for communications over TCP/
MIS - Modbus TCP/IP motors.
Type:
MIS34xxx xx85 or
EM
MIS43xxx xx85
EM
To be used in following stepper products:
- Integrated from factory