I/O Descriptions - JVL MAC00-EC41 User Manual

2.2
2.2.1 Hardware overview
Module status indicators.
L/A IN
Primary Ethernet
channel M12 ‐ 4pin
female (D‐coded)
and LED for showing
activity.
L/A OUT
Secondary Ethernet
channel M12 ‐ 4pin
female Ethernet coded
(D coded) Used when
module is daisy chained
MAC Address
Each module is having its own
unique MAC address used
to identify it on the Ethernet
network. The MAC address can also be read electronically
2.2.2 External signals available at the MAC00-Ex4 and Ex41.
Following signals are available.
• "L/A IN" and L/A OUT" connector.
-
• "I/O" connector.
-
-
-
-
JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors

I/O descriptions

Expansion module MAC00-Ex4 and Ex41 front plate
Neutral module for all the Ethernet protocols
The Ethernet connection. L/A IN is connected to the upstream master and L/A
OUT can be used downstream for the next motors/units in the chain.
AIN1 - analogue input +/-10V.
Can be used as input for the zero search sensor or as general analog input for
speed or torque control depending on the what the actual operation mode in the
motor has been setup for.
MAC00-Ex41 offers a second analogue input AIN2. Function similar to AIN1.
Please notice that AIN2 is not available if mounted in a MAC050-MAC141.
O1 - user output 1
Can be used as or as general output control able over the Ethernet interface.
MAC00-Ex41 offers a second digital output (O2). Function similar to O2.
RS232 Interface.
Serial unbalanced interface for connection to a PC or a controller. The protocol
is similar to the USB or RS485 interface, which means that all registers/parame-
ters in the motor can be monitored or changed. RS232 is not recommended for
long distances (>10m).
IN1 - User input 1.
Can be used as general input which can be read over the Ethernet interface.
MAC00-Ex41 offers in total 4 digital inputs (IN1, IN2, IN3 and IN4).
(MAC00‐Ex4 shown)
TT3038-02GB
Only MAC
PWR
Power supply connector
M12 ‐ 5pin male and
Green LED for indicating
power applied
I/O
I/O's and RS232 interface
MAC00‐Ex4 (basic version)
M12 ‐ 8pin female
1 digital input and 1 digital
output, 1 analogue input
MAC00‐Ex41 (ext. verison)
M12 ‐ 17pin female
4 digital inputs and 2 digital
outputs, 2 analogue input
2 RS422/RS485 channels
Serial number
Eeach module have its own
unique serial number which
can be used for determine
hardware version etc.
17