Communication Settings - NovaStar VX6s User Manual

All-in-One Video Controller VX6s
User Manual
Advanced Properties
Figure 3-24 Advanced properties



Factory Reset
This function is used to reset current device to factory settings.
Figure 3-25 Factory reset
Hardware Version
This function is used to check the hardware version of the VX6s. If a new version is
released, you can log in to NovaLCT on the PC to update the firmware programs of
the VX6s.

3.10 Communication Settings

This function is used to set the communication mode and network parameters.
www.novastar.tech
Output Frequency: Adjust the output frequency of sending card. The range is
24 Hz–60 Hz.
Grayscale: Adjust the grayscale of the OLED screen. The range is 4–15.
Homepage Return Time: Set the period of time during which the system stays
at the current page before returning to the homepage automatically when there
is no operation performed.
3 Menu Operations
20