Display Control - NovaStar VX6s User Manual

All-in-One Video Controller VX6s
User Manual
Figure 3-16 OSD settings





3.7 Display Control

This function is used to control the display. You can set the display to go black,
display a test pattern, or go to normal display. You can also set the Take effect and
Take speed.
Figure 3-17 Display control






www.novastar.tech
OSD Status: The status of OSD function
Initial X: The initial horizontal coordinate
Initial Y: The initial vertical coordinate
Priority: The priority of OSD over window. You can choose Top or Bottom.
Take Effect: The transition effects of sending PVW image to PGM. There are 22
effects in total, such as cut, fade, wipe from top, wipe from bottom, etc.
Take Speed: The speed of transition effects, including slow, medium slow,
medium, fast, and super fast.
Normal: The LED screen displays the content of current input source normally.
Freeze: The current frame is frozen and always displayed.
Black Out: The screen goes black and does not display the content.
Test Pattern: There are 22 test patterns in total, including pure colors, gradients
and grids. You can adjust the brightness, space and speed of the test pattern
based on test needs.
3 Menu Operations
16