Mapping; Configuration Template; Window Settings - NovaStar VX6s User Manual

All-in-One Video Controller VX6s
User Manual

3.4.6 Mapping

When the Mapping function is enabled, each cabinet's receiving card No. and
Ethernet port information will be displayed on the LED display, which makes it
convenient to check the cabinet information.

3.4.7 Configuration Template

The VX6s supports configuring 3 templates of screen configuration. After the screen
is configured, save the configuration parameters as a configuration template. The
screen configuration parameters can be directly applied by choosing a template.
Figure 3-13 Configuration template

3.5 Window Settings

The VX6s supports up to 3 windows. The input source, size, position, priority and
input cropping of each window can be set.
Window Settings
Step 1 Rotate the knob to select Window1 Setting, and press the knob to enter the
submenu.
Step 2 Rotate the knob to select a parameter item you want to adjust and press the knob to
enter the parameter adjustment status. Then, rotate the knob to adjust the parameter
value. At last, press the knob again to confirm the parameter value.








www.novastar.tech
Window1 State: The status of current window
Input Source: The input source used by current window
H Width: The number of pixels in the horizontal direction
V Height: The number of pixels in the vertical direction
Initial X: The initial horizontal coordinate of the window
Initial Y: The initial vertical coordinate of the window
Priority: The displaying order of the window
Input Crop: The function of cropping the input source and displaying the
cropped input source on current window
3 Menu Operations
14