Usb Playback - NovaStar VX6s User Manual

All-in-One Video Controller VX6s
User Manual
Instructions on mouse operations:
1. Hold down the left mouse button on a media file to change the file order in the
2. Click to confirm an operation.
3. Right-click to go back to the previous page.
By using the ViPlex MPlayer software supported by the Android platform of VX6s,
you can play the media stored in the USB drive, set playback orders and sort the
media.
Preparation
Step 1 Insert the USB drive into the type-A USB port on the rear panel of the VX6s.
Step 2 Connect the mouse to the VX6s via the type-A USB port on the rear panel.
Step 3 Set the input source of current window to USB.
Step 4 Connect the monitor screen to the DVI connector in the OUTPUT area of the VX6s.
Playing Media
Step 1 Click the ViPlex MPlayer icon to start the player software.
The player will automatically read the files that can be played in the USB drive and
then show the files under the Disk1 tab.
Step 2 Click the Disk1 tab to open the list of media in USB drive.
Step 3 Click the media file you want to play and the media will be played.



Note:
www.novastar.tech
media list.
Click , select the files you want to delete, and then click Delete Selected to
delete the selected files.
Click to select the transition effect for switching files.
Click to show more settings where you can clear the playback list, sort the
media and set the playback order.
If the playback file is texts, the coded format of the texts must be ANSI codes.
4

USB Playback

4 USB Playback
23