Omron Sysmac NJ Series Network Connection Manual page 23

3
A confirmation dialog box is
displayed. Click the Transfer
Button.
A screen is displayed indicating
the transfer is being performed.
A screen is displayed indicating
the setting was written in the
salve. Click the Close Button.
4
After the transfer is completed,
click the OK Button.
Turn OFF the power supply to
the Sensor Communication Unit.
Turn ON the power supply
again.
5 Clear a Link OFF error that
occurs when communications
with the Sensor Communication
Unit is disconnected.
Select Troubleshooting from
the Tools Menu.
7. Connection Procedure
21