Omron Sysmac NJ Series Network Connection Manual page 22

7.3.4. Setting the Number of Sensors to Connect
Set the number of Sensors connected to the Sensor Communication Unit
1
Double-click the Parameter
under Configurations and Setup
- EtherCAT -
Node1:E3X-ECT(E001) in the
Multiview Explorer or right-click
Parameter and select Edit from
the menu.
2
Node1:E3X-ECT(E001) Tab
Page is displayed in the Edit
Pane.
In the 0x3001:01 Number of
Sensors/Number of Sensors
Setting, set the number of
Sensors connected to the
Sensor Communication Unit (in
this document, 3 is set).
Click the Transfer to Slave
Button.
7. Connection Procedure
20