9
A confirmation dialog is
displayed. Click the Yes Button.
Check that the controller status
on the Toolbox is changed to the
PROGRAM mode.
10
Double-click EtherCAT under
Configurations and Setup in the
Multiview Explorer.
Or, right-click EtherCAT under
Configurations and Setup and
select Edit.
11
The EtherCAT Tab Page is
displayed in the Edit Pane.
12
Right-click the Master Icon and
select Compare and Merge
with Actual Network
Configuration.
A screen is displayed stating
"Get information is being
executed".
13
The Compare and Merge with
Actual Network Configuration
Pane is displayed.
Node address 1 and E3X-ECT
Rev:1.0 are added to the Actual
network configuration after the
comparison.
Click the Apply actual network
configuration Button.
7. Connection Procedure
14