Omron Sysmac NJ Series Network Connection Manual page 15

4
Select Communications Setup
from the Controller Menu.
Additional Information
For details on the online connections to a Controller, refer to Section 5 Going Online with a
Controller in the Sysmac Studio Version 1.0 Operation Manual (Cat. No. W504).
5 The Communications Setup
Dialog Box is displayed.
Select Direct Connection via
USB from Connection Type.
Click the OK Button.
6
Select Online from the
Controller Menu.
A confirmation dialog is
displayed. Click the Yes Button.
*A displayed dialog depends on
the status of the Controller
used. Select the Yes Button or
other button to proceed with the
processing.
7
When an online connection is
established, a yellow bar is
displayed on the top of the Edit
Pane.
8
Select Mode - PROGRAM
Mode from the Controller Menu.
7. Connection Procedure
13