Table of Contents
Advertisement
Predator-Dualview Installation Manual V2.1.21.1
Night Settings
•
Night Changeover - Night Changeover settings can be changed to suit the site requirements. Options
are dark, medium, light and custom. Default is dark. This sets when the camera goes into 'dark
mode'.
•
Custom On Level - Range is 7 to 25. A lower value will set the level on when the scene is brighter, a
higher value will set the level on when the scene is darker. Default is 7.
•
Custom Off Level - Range is 1 to 20. A lower value will set the level off when the scene is brighter, a
higher value will set the level off when the scene is darker. Default is 1.
•
Night Brightness - This controls the exposure compensation, by artificially brightening the image.
Options are normal and auto. Default is normal.
•
Night Illumination - Choose which type of light source is required for when the camera is in dark
mode. Options are IR or white light if supported by the camera.
•
Night Sensor - Can be set to colour or mono. Default is mono.
•
Night Focus Range - Sets how the camera will focus (when in mono) to suit the light source in the
scene. If this is set incorrectly the image may not be in focus.
•
Night Aperture - Can be used to increase the picture detail. Default is 3.
•
Night Noise Reduction - Used to reduce noise with scenes of low illumination. NR must be set to suit
the environment. Default is 1.
•
Night Presets - This can be used to set the presets to different settings if required. Default is on.
(See Advanced Features - page 43).
•
Dim Lights Angle - Feature not available.
•
Dim Lights Intensity - Feature not available.
•
Night HLC Level - Feature not available.
•
Night HLC Mask - Feature not available.
Configuration
•
Sun Shield - Feature not available.
•
Auto Flip - Feature not available.
•
Attack Detect - Feature not available.
•
Upright Mount - Can be used to flip the image, so the camera can be used on a pole or a ceiling.
Default is pole.
•
Status Refresh Rate - Can be used to help speed up telemetry control of the camera, by slowing
down the refresh rate.
OK to program the new settings into the Affiniti-HD.
Cancel to abandon the changes to the camera settings.
© 360 Vision Technology Ltd.
Page 46
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Predator-Dualview and is the answer not in the manual?
Questions and answers