1: Introduction; 2: System Specifications - Panduit PAT1M4.0 Operation Manual

© Panduit Corp. 2018

1: INTRODUCTION

The PAT Fully Automatic Cable Tie Installation System was designed by Panduit Corporation to install Panduit
continuously molded cable ties for high volume wire harnessing applications. The following Panduit Automatic
Cable Tie Installation Tool Systems: PAT1M4.0, PAT1.5M4.0, PAT1M4.0-BT or PAT1.5M4.0-BT; shall be referred
to as "PAT" Systems.
NOTE: In the interest of higher quality and value, Panduit products are continually
being improved and updated.
Consequently, pictures may vary from the enclosed product.

2: SYSTEM SPECIFICATIONS

The Panduit Corporation PAT Cable Tie Installation System consists of four compatible units: the PAT Installation
Tool, the PDM4.0 Dispenser, the PHM Feeder Hose, and Panduit Pan-Ty XMR Cable Ties. Cable ties are available
in reels of 5000 pcs.
NOTE: Any substitution may cause serious damage to the system and/or injury to the operator.
SYMBOL
PA27647A01_05
OPERATION MANUAL
ENGLISH
EXPLANATION
Warning: Hazardous Voltage
Disconnect power before servicing
Warning: Head Obstruction
Warning: Sever Hand
Warning: Wear Safety Glasses
Caution: Air Inlet
WEEE Compliance
Read the Manual
VAC
FUSE
Page: 3 of 64
PAT1M4.0, PAT1M4.0-BT
PAT1.5M4.0, PAT1.5M4.0-BT,
PDM4.0, PHM
12-2018