Panduit PAT1M4.0 Operation Manual page 47

© Panduit Corp. 2018
POSSIBLE CAUSE: This error message appears if the PDM4.0 Dispenser internal regulator was adjusted
incorrectly, or the dispenser piston is not fully shifting.
CORRECTIVE ACTION: Press the "Silence" icon to turn the alarm signal "off", and resume operation. If the
message remains, the system will not operate. Write down the message and notify the maintenance department.
PREVENTION: Never adjust the PDM4.0 Dispenser internal regulator. Follow the maintenance schedule for
greasing the piston.
ERROR 15 - Internal regulator incorrectly set, high
PA27647A01_05
OPERATION MANUAL
ENGLISH
MAINTENANCE > SET> CONVEY
PSI BAR
CONVEY 47 3.24
TIE PRESSURE RANGE
1M 47 - 52 3.2 - 3.6
1.5M 37 - 42 2.6 - 2.9
ERROR 15 > INTERNAL REG.
INCORRECTLY SET, HIGH
AIR BURST LOAD
MAINTENANCE SILENCE
Error Screen
MAINTENANCE > SET> CONVEY
PSI BAR
CONVEY 47 3.24
TIE PRESSURE RANGE
1M 47 - 52 3.2 - 3.6
1.5M 37 - 42 2.6 - 2.9
Page: 45 of 64
PAT1M4.0, PAT1M4.0-BT
PAT1.5M4.0, PAT1.5M4.0-BT,
PDM4.0, PHM
10
BACK
83
HELP BACK
10
BACK
12-2018