Panduit PAT1M4.0 Operation Manual page 26

© Panduit Corp. 2018
The Ready menu will display the following icons: Maintenance, Tie Type, & Load. The ready menu is identified
by the green tile at the top of the display. This menu also provides the user resettable counter that keeps track
of the number of cable ties successfully applied.
By pressing the "Tie Type " icon
user set the correct internal regulator pressure per the tie type (1M or 1.5M). How to adjust the regulator
pressure is explained in System Power Up & Setup, on Page 16.
Press the "BACK" icon
also be accessed by going through the maintenance and setting menus as well.
By pressing the "Load" icon, the unit will begin loading the cable ties. This procedure is explained in Loading
XMR Cable Ties, on Page 17. Once the ties are fully loaded, the dispenser will display the "Ready" state in the
green bar.
The "Maintenance" icon
The functions are displayed as icons and have cascading functions. Press the icon to go up (forward) one
level, or press the "BACK" icon
PA27647A01_05
OPERATION MANUAL
ENGLISH
, the user will advance to the convey pressure screen to help the
MAINTENANCE > SET> CONVEY
PSI BAR
CONVEY 47 3.24
TIE PRESSURE RANGE
1M 47 - 52 3.2 - 3.6
1.5M 37 - 42 2.6 - 2.9
three times to return back to the Ready Menu. Note: the convey menu can
will advance to the next menu level to activate the other dispenser functions.
to go down (back) one level.
Page: 24 of 64
PAT1M4.0, PAT1M4.0-BT
PAT1.5M4.0, PAT1.5M4.0-BT,
PDM4.0, PHM
10
BACK
12-2018