To Broadcast A Document - BT PaperJet 50 User Manual

PaperJet 50 User Guide 26/7/01

To broadcast a document

You can set your machine to send a document to up
10 different numbers (broadcasting).
See "To fax from memory" below.
To fax from memory
Your PaperJet 50 has a memory which lets
you store one document for sending at a
pre-set time.
Place document face down in the document
feeder.
If necessary set the Contrast and Resolution
settings.
Function
Display shows TX FROM MEMORY
F
The document is scanned into the memory.
Display shows STORING then TYPE TIME
Start
If using the 12 hour clock, press the Function
button to switch between a for AM and p for PM .
Press the < > buttons to move the cursor.
Enter the time at which you want your fax
0 - 9
to be sent, e.g. 18.30 or press the Start
button to select the current time.
Display shows TYPE FAX NUMBER
Start
Use the keypad to dial the number you
0 - 9
want.
PaperJet 50 user guide – Edition 3 – 29.8.00
10:18 am Page 19
HH:MM
Display shows TYPE FAX NUMBER . If
required, enter the second number to which
Start
you want to send your fax and press the
Start button again.
Display shows TYPE NUMBER and the
number already entered.
Start
0 - 9 You can change the number if required.
Repeat the last step until you have entered
all the numbers you want up to a maximum
of 10.
After entering your last number press Start
again to confirm. Display shows TX SET
Start
then AUTOMATIC RX (or current receive
mode) and MEMORY TX .
To change, re-send or cancel a stored
document
When you have stored a document in the
memory for sending later:
Display shows AUTOMATIC RX
Start MEMORY TX
Function
Display shows TX FROM MEMORY
F
Display shows ALREADY ENTERED
Start
Display shows PRINT SETTING?
Start
Press to switch between this and the other
Volume
two options CHANGE PARAM? or CANCEL
SETTING?
Press to select the option displayed.
PRINT – you get a print out of the fax
details and then the machine returns to
standby.
19