Using Your Paperjet 50 - BT PaperJet 50 User Manual

PaperJet 50 User Guide 26/7/01

Using your PaperJet 50

Sending faxes
What type of paper you can use
Dimensions:
• width
• length
Thickness:
• 60 -90gsm
• 50 -140gsm
• 140 -160gsm
Do not use
• Torn, crumpled and rolled paper.
• Paper that is too thin (unless in the document
holder supplied).
• Wet or moist paper.
• Carbon paper.
• Correction fluid, paperclips and staples.
Inserting documents in the feeder
• Gently insert documents to be faxed (up to 5 pages)
face down.
• Adjust the paper feeder width guides to fit.
Setting the contrast and resolution
You can choose different resolution and contrast
settings to ensure the best quality when faxing or
copying a document.
PaperJet 50 user guide – Edition 3 – 29.8.00
10:18 am Page 15
148mm – 216mm.
216mm – 600mm.
max 5 sheets.
1 sheet at a time.
when using the document holders.
Setting the contrast and resolution
After inserting the document in the feeder.
Contrast
Contrast
Press the Contrast button.
To select the setting you want.
Volume
• NORMAL – when the original document
is clearly printed.
• DARK – when the original document is
light.
• LIGHT – when the original document is
dark.
After the fax has been sent, your PaperJet
always resets to normal contrast.
Resolution
Resolution
Press the Resolution button.
To select the setting you want.
Volume
• STD (standard) – when the original
contains easy to read text.
• FINE – when the original contains small
or hard-to-read text or line diagrams.
• FINE and HALF-TONE – when the
original contains varying shades of grey
or pictures.
NOTE
FINE and HALF-TONE settings take longer to send.
15