Table of Contents
Advertisement
Figure 127. Installing the TPM
Next steps
1
If removed,
install the
2
If removed,
install the rear drive cage.
3
Install the air
shroud.
4
Install
the system
cover.
5
Place the system into the rack. For more information, see the Rail Installation Guide available at www.dell.com/poweredgemanuals.
6
Open the drive
bays, install
7
Install the
power supply
8
Follow the procedure listed in
Initializing TPM for BitLocker users
Initialize the TPM.
For more information, see https://technet.microsoft.com/en-us/library/cc753140.aspx.
The TPM Status changes to Enabled, Activated.
Initializing the TPM 1.2 for TXT users
1
While booting your system, press F2 to enter System Setup.
2
On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3
From the TPM Security option, select On with Pre-boot Measurements.
4
From the TPM Command option, select Activate.
5
Save the settings.
6
Restart your system.
7
Enter System Setup again.
8
On the System Setup Main Menu screen, click System BIOS > System Security Settings.
9
From the Intel TXT option, select On.
156
Installing and removing system components
risers.
all
drives, and then
close the drive bays.
units.
After working inside your
system.
Advertisement
Table of Contents
