Table of Contents
Advertisement
Next steps
1
Replace the system
board.
2
Follow the procedure listed in
3
To verify if the memory module has been installed properly, press F2 and navigate to System Setup Main Menu > System BIOS >
Memory Settings. In the Memory Settings screen, the System Memory Size must reflect the updated capacity of the installed
memory.
4
If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure that the memory module is firmly
seated in the memory module socket.
5
Run the system memory test in system diagnostics.
Initializing TPM for BitLocker users
1
Initialize the TPM.
For more information, see
2
The TPM Status changes to Enabled, Activated.
Initializing the TPM 1.2 for TXT users
1
While booting your system, press F2 to enter System Setup.
2
On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3
From the TPM Security option, select On with Preboot Measurements.
4
From the TPM Command option, select Activate.
5
Save the settings.
6
Restart your system.
7
Enter System Setup again.
8
On the System Setup Main Menu screen, click System BIOS > System Security Settings.
9
From the Intel TXT option, select On.
Initializing the TPM 2.0 for TXT users
1
While booting your system, press F2 to enter System Setup.
2
On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3
From the TPM Security option, select On.
4
Save the settings.
5
Restart your system.
6
Enter System Setup again.
7
On the System Setup Main Menu screen, click System BIOS > System Security Settings.
8
Select the TPM Advanced Settings option.
9
From the TPM2 Algorithm Selection option, select SHA256, then go back to System Security Settings screen.
10
On the System Security Settings screen, from the Intel TXT option, select On.
11
Save the settings.
12
Restart your system.
After working inside your
initializing the TPM for Intel TXT
system.
users.
Installing and removing system components
83
Advertisement
Table of Contents
