Operating Mode Functions - Lincoln 905SF Installation And Maintenance Manual

Operating mode
functions
Re-settable/accumulated
totals
The meter has two flow totalizers. One is
Re-settable Total the other is Accumulated
Total.
1 To see the Accumulated Total and the
Re-settable Total:
1.1 Press and hold the TOTAL button to
see the Accumulated Total.
1.2 Continue holding the TOTAL button.
1.3 After three seconds the screen
changes to the Re-settable Total.
Resettable total
2 RESET TOTAL displays the total fluid dis-
pensed since the Re-settable Total was
last set back to zero.
3 Press the RESET button while viewing
Reset total to set it back to zero.
4 Release the RESET button to return to
the operating display.
! Notice
Accumulated total cannot be reset
unless user changes from English units
to metric units or from metric to English
units († Change factory settings,
Change unit of measure, page 15).
Emergency override
In case of an emergency or to interrupt a
batch, the meter is equipped with an emer-
gency override.
1 Press the red STOP button to activate the
Emergency Override. The override closes
the valve, immediately stopping fluid flow.
2 Batching can continue after an
Emergency Override by pulling up on the
trigger.
8