Table of Contents
Advertisement
W A R N I N G
Meter hazards
Equipment misuse can cause the meter
to rupture or malfunction and cause se-
rious injury.
• This equipment is for professional use
only.
• Read all instructions, tags, and labels
before operating the equipment.
• Use the equipment only for its intend-
ed purpose.
• Do not modify or alter the equipment.
• Do not leave equipment unattended
while dispensing.
• Check equipment daily. Repair or re-
place worn or damaged parts
immediately.
• Do not exceed the maximum working
pressure level of the lowest rated sys-
tem component.
• Use only extensions and nozzles that
are designed for use with this
equipment.
• Use only fluids and solvents that are
compatible with the equipment. Read
all fluid and solvent manufacturer's
warnings.
• Tighten all fluid connections before
operating this equipment.
• Do not stop or deflect leaks with
hands, body gloves or rags.
• Do not dispense towards any person
or any part of the body.
• Do not place hands or fingers over
the end of or into the dispense valve.
• Comply with all local, state and federal
fire, electrical and safety regulations.
• Use of this product in a manner other
than specified in this manual may re-
sult in impaired operation or damage
to equipment.
W A R N I N G
This meter is not designed to dispense
petroleum products or methanol based
windshield wiper fluid. This meter is de-
signed for windshield wiper fluid, brake
fluid, or water-based solutions.
General
The Electronic Preset Meter (EPM) is de-
signed specifically to dispense antifreeze
(ethylene glycol) solution, windshield wiper
solution, water based solution, and brake
fluid. This meter is not designed to dispense
petroleum based products or methanol
based windshield washer fluid.
Any batch size quarts, liters, pints or
gallons can be programmed quickly.
This unit can be programmed by the user
to dispense in quarts, liters, pints, and gal-
lons. Any batch size can be programmed
quickly.
A 5-digit liquid crystal display, accurate to
the second decimal point, shows the exact
amount of fluid dispensed.
Typical applications
• Fleet maintenance shops
• Industrial assembly
• Quick lube facilities
• Dealerships
• Construction and mining equipment
• General automotive service centres
• Specialty service and repair shops
Features and
specifications
• Oval gear driven meter
• Durable, rugged design
• Rubber boot
• Large, easy-to-read LCD display
• Ease of operation
• CE approved
• Totalization in liters and gallons
• Delivery in liters, quarts, pints, gallons
• Automatic non-drip nozzle with manual
shut-off feature
• Maximum totalizer number: 99,999 gal-
lons or liters
• Maximum dispense volume: 99,999 units
• Maximum preset volume: 99.9 Units
• Calibration factor for different fluids
4
• Changeable units of measure
• One programmable preset
• Total and re-settable total
• Minimum 20,000 cycles on battery life
• Low battery indicator
• Low battery safety lock out feature
• Uses standard AA batteries
• In-line swivel standard with all meters
• Automatic shut-off at preset amount
• Emergency manual shut-off
• Precision control valve operation
!
Notice
Meter is not for measurement of
fluid that is for resale.
Meter overview
An Electronic Preset Meter (EPM) that is in-
tended to be used for start-up purposes or
when a fluid management system is not in
use.
The meter automatically shuts off when
the dispense batch quantity has been
reached.
A "Top Off" feature allows additional fluid
to be dispensed and tracked after the batch
quantity has been dispensed.
Upon completion of the dispense, the op-
erator presses the RESET button. The dis-
play resets and the meter is now ready for
the next batch to be dispensed.
Hide quick links:
Advertisement
Table of Contents
