Lincoln 905SF Installation And Maintenance Manual page 5

Meter buttons
10 1 0.1
Total
Auto
Reset
LCD display
1
6
7
Used to enter the dispense batch quantity when
in the EPM mode.
Total is used to display the accumulated total of
fluid dispensed, as well as the re-settable total
Auto is used to enter and exit the manual or
batch mode.
Reset is
• used in EPM mode to clear the previous batch.
• used to reset the re-settable total dispensed
while pressing the TOTAL button.
Shut-off or stop is used to stop the flow through
an emergency override.
2
3
4
5
1 Displays re-settable total, accumulated total and scale factor.
2 Displays unit of measure.
3 Arrows flash when RF communication is in progress with key-
pad. Not used on this model.
4 Preset batch quantity.
5 History icon. Not used on this model.
6 AUTO indicates EPM mode.
7 Low battery icon.
5
Meter display