Lincoln B Series Manual

DESCRIPTION
The Model 84672 high floow hose reel is a spring operated unit
designed to hold and retract upto 50 feet of 1/2" diameter hose.
Larger hose diameters can be used with reduced hose length,
see maximum hose capacity chart on page 2.
The reel is a heavy duty unit and designed for bus and truck
lubrication or wherever extra heavy duty construction and longer
length delivery hose is required. The reel can be installed as a
single unit or in multiple configurations.
Reel features include a reel latch that automatically locks at de-
sired positions as the hose is extended and releases with a short
pull on the hose.
OWNER/OPERATOR RESPONSIBILITY
It is the owner/operator responsibility to properly use and
maintain this equipment.
The instructions and warnings contained in this manual shall
be read and understood by the owner/operator prior to operat-
ing this equipment.
If an owner/operator does not understand English, the con-
tents of this manual shall be explained in the owner/operator
native language to assure the owner/operator comprehends.
It is the owner/operator responsibility to maintain the legibility
of all warning and instruction labels.
©
Systems which will be dispensing fluids under pressure may
need to be protected by using a thermal relief kit, which will
safely limit the pressures caused by thermal expansion.
Please contact your local Lincoln distributor and refer to
Service Page Section K5, Page 31 for more details. Failure
to include thermal relief protection may cause damage not
covered under Lincoln's warranty policy.
MAY - 2010

SPECIFICATIONS

Maximum working pressure
Material Inlet
Material outlet
Sheave width
Sheave diameter
Drum diameter
Overall width
Overall height
Overall depth
The owner/operator shall retain this manual for future ref-
erence to Important warnings, operating and maintenance
Instructions.
Failure to heed the following warnings including mis-
use, over pressurizing, modifying parts, using incom-
patible chemicals and fluids, or using worn or damaged
parts, may result in equipment damage and/or serious
personal injury, fire, explosion, or property damage.
Do not exceed the stated maximum working pressure of the
reel or of the lowest rated component in your system.
Do not alter or modify any part of this equipment.
Do not operate this equipment with combustible gas.
Do not attempt to repair or disassemble the equipment
while the system Is pressurized.
Make sure all fluid connections are securely tightened be-
fore using this equipment.
Always read and follow the fluid manufacturer's recommen-
dations regarding fluid compatibility, and the use of
protective clothing and equipment.
Check all equipment regularly and repair or replace worn or
damaged parts immediately.
Never point the dispensing valve at any part of the body or
at another person.
Never try to stop or deflect material from dispensing valve
or leading connection or component with your hand or body.
Always check equipment for proper operation before each
use, making sure safety devices are in place and operating
properly.
Always follow the pressure relief procedure after shutting
off the pump, when checking or servicing any part of the
system, and when installing, cleaning or changing any part
of the system.
Form 404110
Model 84672
BARE HOSE REEL
2000 p.s.i.
3/4" NPT (Female)
3/4" NPT (Female)
5-1/2"
19-1/4"
12-3/4"
10"
22-1/2"
21"
© Indicates change
- E35
Section
Page
Series "B"
- 42F